Drainage Solutions Fitting - Branch 45 deg.
Rated 3.5/5 based on 11 customer reviews
  • Superior Delivery
    in greater cairo
  • Product Authenticity
    100% GUARANTEED
  • 14 Day Free Returns
    conditions apply
  • Secure Payments
    safe and convenient
  • Top Brands
    all in one place

Drainage Solutions Fitting - Branch 45 deg.

Available: In Stock
Wishlist Compare
  • Product SKU: 053-KSL-352040015
EGP 18.02

Polypropylene (PP) push-fit drainage pipe fitting.

A. Introduction
Compared to the solvent-gluing drainage system, EGIC produced push-fit drainage system made of polypropylene to ensure ease of assembly and insulation. Kessel products include a special seal plugs that tightly grip the pipes when they are inserted into the fitting sockets.

  • Material: polypropylene (PP) hot water resistant, stabilized light sensitivity
  • Size: 50mm – 160mm
  • Pipes Length: 3 meters straight length
  • Jointing: Push-fit connection
  • Color: Grey RAL 7037

B. The Advantages of Kessel Push-Fit Drainage System are:

  • The speed of making a connection with push-fit fittings where plumber can quickly cap or repair 
  • Push-fit fittings are available in various sizes for different kinds of applications
  • Push-fit fittings are easily removed so they can be repositioned as needed without specialized tools
  • Plastic pipe with high flexibility, anti-leakage and chemical resistant

C. Installation Tips

  • Pipes and fittings are connected by a push-fit socket and sealed tight with sealing ring.
  • Pipes can be easily cut to fit any length, chamfered and burned, connected and fixed in position.
  • In horizontal lines, the spacing of pipe clamps must not be more than ten times the outer diameter of the pipe. in vertical lines, spacing should not more than 1 meter (maximum 2 meters)
  • If the floor is covered with asphalt mastic, exposed pipe should be protected with heat-insulating material.
  • When Kessel pipes are laid in concrete, the socket gaps should be sealed with adhesive tape in order to prevent penetration of cement grout.

Dn α Z1 Z2 Z3 Kg
32/32 45° | 87.5° 92.0 | 81.0 39 | 20 39 | 20 0.033 | 0.031
50/50 45° | 87.5° 130.0 | 114.9 61 | 29 61 | 29 0.092 | 0.080
75/50 45° | 87.5° 134.0 | 118.0 79 | 42 74 | 30 0.115 | 0.115
75/75 45° | 87.5° 168.0 | 142.0 91 | 43 91 | 43 0.115 | 0.142
110/50 45° | 87.5° 148.0 | 122.0 104 | 59 91 | 30 0.220 | 0.205
110/75 45° | 87.5° 175.0 | 152.0 116 | 60 109 | 44 0.265 | 0.235
110/110 45° | 87.5° 266.0 | 185.0 133 | 61 133 | 61 0.375 | 0.310